BLOSSOM CHEER
A Door,  Guards A Home.

Floor Hinge Door Installation Procedure

U.S.$ 0.00
0.00
Quantity:
Buy now
Add to cart
  
Product Description

Floor Hinge
Installation

A. Draw a line to make the center of the floor hinge shaft coincide with the door clip shaft;
B. Open a hole on the ground according to the instruction and the real object, and the size of the hole should be tightly matched with the shell of the ground Spring, and should not be loose;
C. Put the ground spring into the opened hole and straighten it;
D. Lift up the door with the door clip to make the shaft of the ground Spring insert into the shaft hole of the door leaf;
E. Adjust the screws in the three directions of the ground Spring, keep the door leaf vertical, and rotate the axis up and down to coincide;
F. Adjust the closing speed;
G. Cover the decorative cover of the ground Spring. The installation precision of the ground Spring has a great influence on its service life.
Floor Hinge Pictures


Finished floor hinge with pivot door reference picture

地弹簧安装步骤:
A、画线,使地弹簧转轴中心与门夹转轴重合;
B、根据说明书和实物在地面开孔,孔的大小要与地弹簧壳体配紧,不能松动;
C、将地弹簧放入开好的孔内摆正;
D、抬起装好门夹的门使地弹簧的转轴插如门扇的转轴孔内;
E、调节地弹簧三个方向的螺丝,保持门扇垂直,上下转动轴心重合;
F、调节关门的速度;
G、盖上地弹簧装饰盖,地弹簧的安装精度对其使用寿命影响很大。
Prev: None
Next: None